Welcome to Microvillage Communications

Send a message

PhoneScan IP Phone Automatic Provisioning App

How to provision IP phones in CompletePBX using PhoneScan mobile app

Xorcom PhoneScan Provisioning App is an automatic IP phones provisioning android application that works with CompletePBX Endpoint Manager to streamline system installation and IP phone provisioning. It saves a lot of time and effort in assigning phone for users, and it allows people that are not necessarily PBX technicians to perform this task simply via a mobile Android device.

Requirements

  1. Android device v.4 or higher with rear-side camera
  2. CompletePBX system should be licensed to use PhoneScan Provisioning App

Instructions

  1. Setup all the required extensions and devices in your CompletePBX system (PBX -> Extensions -> Extensions, or Import Extensions)
  2. Setup the required phone templates in CompletePBX system (Settings -> Endpoint Manager -> Create Templates)
  3. Download and install Xorcom PhoneScan Provisionins App on an Android device
  4. In your CompletePBX GUI go to Settings -> Endpoint Manager -> PhoneScan
  5. Turn Enabled to ON.   You should now see a QR code on the screen.
  6. Turn Enabled to ON.   You should now see a QR code on the screen.
  1.  On your android device open PhoneScan, and tap Scan PBX QR Code.
  2. A scanner will open:
  1. Scan the QR code from the screen.  This will connect PhoneScan to the CompletePBX system.  You will get a confirmation notification in the app.  Another scanner screen will open.
  1. Scan the MAC ID barcode from the phone label or phone packaging label.  You will get a confirmation of the MAC ID scanned on the screen.
  1. Tap Next
  2. Tap Select Template to select the template you want to assign.  If there is only one template for that phone model in the CompletePBX system, it will be automatically selected.
  3. Tap Search Device and start typing Device Name, Extension Number or Extension name.  Select the relevant device.
  1. You will now see the template, extension name and number and device name you have selected.
  1.  If all is OK tap Assign.  This will associate the scanned IP phone with the selected device in the system.  The phone is now assigned to the device in the system and as soon as it connects to the PBX it will receive the new settings.
  1. Choose whether you want to continue to the next phone or end the session.  When ending the session the app will close the connection from the CompletePBX side for security reasons.

PhoneScan Provisioning App is now released in beta version.